Indications:
– Sealing concrete sources, pools, cooling towers, concrete water and sewage pipes, etc.
– As a coating on concrete structures that are exposed to chemical corrosion.
RW Crystal Penetron is the latest phenomenon in the field of sealing of concrete structures. It is in the form of powder that is mixed with water and becomes a thick color and is used to seal concrete tanks, pools, piers, cooling towers, etc.
"/>
explanations:
RW Crystal Penetron is the latest phenomenon in the field of sealing of concrete structures. It is in the form of powder that is mixed with water and becomes a thick color and is used to seal concrete tanks, pools, piers, cooling towers, etc.
– Sealing concrete sources, pools, cooling towers, concrete water and sewage pipes, etc.
– As a coating on concrete structures that are exposed to chemical corrosion.
Due to the penetration performance of RW Crystal Penetron, due to filling the pores of the concrete structure by performing the RW Crystal Penetron crystallization process, the concrete structure becomes inherently impermeable.
Because RW Crystal Penetron is resistant in the pH range of 11-3: its use is very effective in protecting concrete surfaces that are exposed to chemical corrosion, such as water and sewage pipes, structures adjacent to seashores, and so on.
Due to the ability to regenerate the crystals with the possible new infiltration of water into the structure, this infiltration also dries and therefore in concrete structures, the risk of reinforcement corrosion due to dryness inside the concrete is minimized.
Consumption of RW Crystal Penetron is about 800 to 1200 grams per square meter, which depends on the roughness and smoothness of the surface.
RW Crystal Penetron powder is mixed with water with the following mixing ratio and consumed.
Mixing ratio: 2 volumes of water + 5 volumes of RW Crystal Penetron
For better mixing, it is recommended to mix with the help of mechanical drills that have impellers.
Surface preparation:
Before applying RW Crystal Penetron in the first stage, the surface must be completely free of any loose parts, dust, oil and grease contamination.
In the last step, the surface should be thoroughly washed using waterjet to ensure that the depth of the structure is saturated with water.
Type: Powder
Gray
Specific weight: gr / cm3 5/1
PH: Resistant in the range 11-3
Adhesion force: Psi250
Storage conditions and duration: Initial packaging and closed away from cold, heat and humidity for 12 months.
Packing: in 25 kg bags.
As with other chemicals, be careful when storing and using this product to avoid contact with the mouth, eyes, and food. In case of possible contact, rinse immediately with plenty of water.
Environmental Tips:
Do not spill excess water or soil.
All products produced and supplied by this company are in accordance with international quality standards.
