Indications:
Metal foundations of buildings, substations, heavy machinery, filling any cavities or gaps or filling around the restraining rods in concrete precasts.
explanations:
RW N Grout is a ready-to-use product that turns into a smooth mortar without shrinkage just by adding a certain amount of water.
This product is manufactured in such a way that it can be easily used in the form of paste or fluid for leveling, grouting or filling pits. In general, RW N Grout is a product that is used to fill any empty space that After the setting operation, a limited and controlled amount of approximately equal to or greater than the amount of contraction due to water evaporation and drying expands.
Using RW N Grout, the clamping operation is performed in a very short time, and after the clamping operation, the hardening operation is performed and the final strength and resistance is achieved.
Metal foundations of buildings, substations, heavy machinery, filling any cavities or gaps or filling around the restraining rods in concrete precasts.
No Shrinkage
Adjustable concentration with the help of water
Rapid achievement of initial resistance
Perfect and very good connection with concrete and steel surfaces
Each 20 kg RW N Grout bag fills a space of 10.32 liters. In general, in the fluid state, 97 bags of RW N grout fill one cubic meter of space.
First, completely clean the desired surface from greasy agents, dust and any kind of oily substances and wash it with water. Then, after drying the waste water, pour a certain amount of water into a mixer or a suitable and clean container and Slowly add RW N Grout (water consumption for each RW N Grout is approximately 3.5 to 4 liters) Stir well for 3 to 5 minutes so that the mixture is uniform and homogeneous and does not bubble Get air. Pour the prepared mortar immediately at a certain point with continuity and at a suitable height that provides the necessary driving pressure.
Immediately cover the open surfaces with a wet baguette and keep it moist until it is ready for payment or achieves its initial setting. If a more reliable curing is achieved, the curing curing product can be used.
Important points:
The temperature of the water used should be such that the temperature of the mortar is between +5 and +35. More windy water should be avoided because it causes more fluidity and as a result dehydration and separation.
Additional operation and vibration should be avoided.
Mortar should be prepared as needed in a grouting step, and re-dilution and excessive use of water should be avoided.
Physical state: Tusi powder
Specific weight: 75/1 gr / cm.
Free expansion: 2 to 5%
Sustainable expansion: 0 to 0.5%
Shelf life and conditions: in the original packaging away from moisture and cold for 12 months.
Packing: in 25 kg bags.
As with other chemicals, be careful when storing and using this product to avoid contact with the mouth, eyes, and food. In case of possible contact, rinse immediately with plenty of water.
Environmental Tips:
Do not spill excess water or soil.
All products produced and supplied by this company are in accordance with international quality standards.
