Description
Applications:
– Waterproofing water tanks, swimming pools, dams, concrete pipes, canals, and all concrete surfaces exposed to water or moisture.
Benefits:
– Simple application method with high resistance and exceptional adhesion.
Dosage:
– Add a minimum of 10% by weight of cement used to the mortar.
Application Method:
1. Mixing with Mortar:
– RW Acrylic Admix 300 can be mixed with the entire mortar to waterproof it. This method is typical for thin concrete applications (2–3 cm thickness).
– Add RW Acrylic Admix 300 to the mortar on-site, ensuring a homogeneous and uniform mixture before pouring.
– To achieve optimal compressive strength, reduce the water content proportionally to the percentage of RW Acrylic Admix 300 added.
2. Surface Waterproofing:
– Mix 5 parts RW N Repair with 1 part RW Acrylic Admix 300 to form a homogeneous paste. Apply to the surface with a minimum thickness of 3 mm.
– Preparation: Clean the surface of dust and grease, then moisten it.
– Post-Application: Prevent rapid drying by keeping the surface moist for at least 24 hours.
Technical Specifications:
– Physical State: White liquid
– Specific Gravity: 1.01 g/cm³
– Solubility (before drying): Water-soluble
– pH: 8
Storage Conditions:
– Store in original packaging, away from extreme temperatures, for up to 6 months.
– Packaging: Available in 1, 4, 10, and 20-liter gallons, and 220 kg barrels.
Safety Notes:
– Avoid contact with eyes, mouth, and food. In case of contact, rinse thoroughly with water.
Environmental Notes:
– Do not dispose of excess material in water or soil.
Quality Certification:
– All products comply with international quality standards.
Reviews
There are no reviews yet.