Manufacture of consumer mortars in steel structures of buildings and heavy machinery
Performing injection operations in dams and tunnels
Carrying out repair and repair operations of concrete structures that must prevent the shrinkage of concrete or mortar
Controllable expansion path in concrete
Prevent concrete from shrinking and cracking
Prevent concrete from leaking
Accelerate the time of obtaining initial and final resistances
Compatibility with all types of Portland cements except Type 5
Increase the compressive strength of concrete
Free of iron particles and rust stains
Depending on the amount of expansion required and taking into account the amount of C3S and C3A in the cement and the air temperature, the consumption for the mortar is between 2% to 8% of the weight of the cement.
Note: To make low-expansion mortars, it is necessary to perform workshop tests.
Method of Use:
Expansion group should be added to concrete or mortar after complete mixing of all components. (The time required to mix with concrete is about 3 to 5 minutes)
The prepared mortar or concrete should be used for 15 to 20 minutes.
Careful maintenance and processing of executed concrete is mandatory.
technical specification :
Physical state: Tusi powder
Specific weight: gr / cm³ 25/1
Free expansion: 2 to 5%
Sustainable expansion: 0 to 0.5%
Storage conditions and duration: in the original packaging away from moisture and cold for 12 months.
Packing: 25 kg bags.
Cleaning: Work tools Immediately after finishing work, when the mortar on it is still fresh, wash it with water. The dried mortar can be removed mechanically.
As with other chemicals, be careful when storing and using this product to avoid contact with the mouth, eyes, and food. In case of possible contact, rinse immediately with plenty of water.
All products produced and supplied by this company are in accordance with international quality standards.
Do not spill excess water or soil.