To make it easier and faster to open the molds.
Prevent concrete or cement particles from sticking to the surface of the formwork.
Achieve a concrete facade with a smooth, clean, compact surface and without grease stains.
Prevent any subsequent coating on the concrete.
Prevent mold wear.
Save time, manpower and reduce the cost of preparing templates
The emulsifier used in this oil is a combination of German N6 soap and neutralized oleic acid.
RW Form Oil-W provides many facilities in the manufacture of prefabricated and prestressed concrete parts and is perfectly suitable for parts made with temperatures up to 90 degrees Celsius.
RW Form Oil-W contains stainless steel and prevents rusting of metal molds.
RW Form Oil-W reduces the ability to absorb moisture in wooden molds, preventing them from swelling, bursting and rotting.
Each liter of RW Form Oil-W covers an area of 40 to 50 square meters for metal and plastic surfaces and 20 square meters for wood surfaces.
How to use:
RW Form Oil-W can be mixed with water up to 1 times as needed, after stirring with a pistol or roll, or brush on the surface of the mold. (Stirring the mixture thoroughly to obtain a homogeneous solution is required).
technical specification :
Color: clear yellow
Specific weight: about 0.85 gr / cm.
PH: About 7
Usability: Diluted solution in air above zero degrees Celsius.
Storage conditions and shelf life: Initial packing and closed away from cold and heat for 12 months.
Packaging: 20 gallons and 220 liter barrels.
In case of contact with skin, rinse immediately with soap and water. In case of contact with eyes or respiratory mucosa, rinse immediately with plenty of water and seek medical advice immediately.
Do not spill excess water or soil.
All products produced and supplied by this company are in accordance with international quality standards.