Water-based protective resin

Water-based protective resin


Aqueous solution used to create hydrophobic properties for various types of building mineral materials.


– To dehydrate the surfaces of materials to remove moisture such as bricks, natural materials and ….
– As an additive in the production of concrete, gypsum and the production of waterproof cement parts and blocks
– To make waterproof mortar
– To dilute plastic and acrylic paints to increase moisture resistance

Consumption benefits:

Causes hydrophobicity and complete water proofing of the surface of Kigard
Its water repellency properties are enhanced by the carbon monoxide reaction in the air
Reduces water absorption of materials, increases frost resistance, increases ka life.
Resistant to alternating heating cooling
Maintains deep penetration into the pores without clogging them and the respiration process of the material
Colorless and the appearance of the material is preserved
Refractory and resistant to temperatures of -30 to +30 degrees Celsius
Low levels of volatile organic matter

Method of Use:

To hydrophobic the surface before use, it is recommended to test RW Top Seal 100 liquid on the sample. Suitable liquid is suitable for use on all surfaces of building materials that have some way of absorbing moisture. Like brick surfaces, natural sandstones and even thatch, this solution can be applied by dipping, spraying or using a brush. The amount of consumption depends on the type of solution and its spongy nature and the amount of hydrophobicity, and the average amount of use per square meter is 150 to 400 ml of solution.

Important points when using:

Always test on a small sample to determine the amount of solution to use in a particular case to obtain the required amount. Spray, brush or roller can be used to process the work surface. Apply the solution on a dry and clean surface until completely absorbed and prevent the liquid from dripping and dropping. RW Top Seal 100 solution should be applied on the desired surface only once. If more than one hand is applied in large quantities, it will cause scale and whitening of the work surface.

Safety Tips:

As with other chemicals, be careful when storing and working with this product to avoid contact with the mouth, eyes and food, and in case of possible contact, immediately flush the area with plenty of water.

Environmental Tips:

Do not spill excess water or soil.

Quality confirmation:

All products produced and supplied by this company are in accordance with international quality standards.


سوالی دارید؟در خدمتیم.