Two-component polymer sealant

Two-component polymer sealant


Water proofer is water tanks and repairs the surfaces of tanks and pools. By applying a delicate coating on these surfaces, the desired surface can be waterproofed and possible seams and cracks, even hair, can be covered.

RW Water Shield 1000 is produced on the basis of synthetic and mineral polymers and is offered in two parts.


Water tanks, canals, sewers, surfaces that are constantly in the vicinity of moisture and water, the body of bridges, etc.

Consumption benefits:

Resistant to some chemical agents
Excellent adhesion, with good adsorption power in concrete pores
With high elasticity compared to the substrate surface
High tensile, flexural, compressive, and bonding strength
The mechanism of this material is such that the hydration of the cement (contained in Part A) works in harmony with the polymer (contained in Part B) and they are physically joined in such a way that it hardens after forming and no suspended materials remain.
The surface of free reinforcement protects and prevents the freezing of concrete surfaces.

Consumption rate:

RW Water Shield 1000 is required for each square meter with a thickness of 3 mm.

Method of Use:

Mixing method: Pour four cups of component A with one cup of component B in a suitable container and mix it to obtain a workable dough that can be adjusted by adding water. Up to 2 hours.


1- Remove the work surface from dust, grease and voids and remove brittle and weak places from the place.

2. Cover the grooves and worms once with RW Water Shield 1000 and then perform the main operation of RW Water Shield 1000.

3- The work surface should be completely watered before execution.

4- Depending on the need, the thickness of each execution step should not exceed 5 mm.

5- Ambient temperature is recommended between 10 and 35 degrees during execution.

6- It is necessary to keep the surface moist after application.

Technical specifications of component A:

Color: gray

Physical state: powder

Specific weight: 75/1 gr / cm.

Storage conditions: away from cold, heat and moisture in the original packaging for 12 months.

Packing: in 20 kg bags.

Technical specifications of component B:

White color

Physical state: liquid

Mixability: in water

Specific weight: gr / cm³ 01/1

Storage conditions: away from the bite of cold and heat and in the original packaging for 12 months.

Packing: in 3.5, 10 and 20 gallons and 220 kg barrels.

Cleaning: Wash work tools with water immediately after finishing work when the mortar is still fresh. The dried mortar can be removed mechanically.

Safety Tips:

As with other chemicals, be careful when storing and working with this product to avoid contact with the mouth, eyes and food, and in case of possible contact, immediately flush the area with plenty of water.

Environmental Tips:

Do not spill excess water or soil.

Quality confirmation:

All products produced and supplied by this company are in accordance with international quality standards.

سوالی دارید؟در خدمتیم.