Single component polymer sealant

Single component polymer sealant


RW Water Shield 1400 A sealing coating based on synthetic and mineral polymers, which is offered in part and is suitable for sealing drinking water tanks and concretes that are exposed to seawater or located in acidic or alkaline environments.


Covering drinking water tanks, canals, sewers, bridges, berths, Swiss roofs, building roofs and exteriors, and surfaces that are in constant contact with moisture and water.

Consumption benefits:

Very strong sealing and long life
Anti-sulfate and other corrosive substances
Excellent adhesion to all surfaces
With high elasticity compared to the substrate surface
High tensile, flexural, compressive, and bonding strength
Suitable for drinking water tanks due to insolubility after execution

Consumption rate:

For every square meter with a thickness of one millimeter, 0.5 to 1 kg of RW Water Shield 1400 product is required.

Method of Use:

Pour a 20 kg bag with 2.5 to 4 liters of water in a suitable container and mix it to get a workable dough (its concentration can be adjusted by adding water).

It should be noted that the shelf life of the finished product is 25 minutes depending on the ambient temperature.


Remove the work surface from dust, grease and voids and remove brittle and weak areas.
Correct the grooves and crevices by the repairman and then perform the main operation of RW Water Shield 1400.
Ambient temperature is recommended between 10 and 35 degrees during execution.
It is necessary to keep the surface moist after application.

technical specification:

Color: gray

Physical state: powder

Specific gravity: 1/5 gr / cm.

Mixing time: 5 minutes

Shelf life of the product after mixing: 25 minutes

Execution temperature: 5 to 35 degrees Celsius

Drying time after application: 1 to 4 days

Storage conditions: away from cold, heat and moisture in the original packaging for 12 months.

Packing: in 20 kg bags.

Cleaning: Wash work tools with water immediately after finishing work when the mortar is still fresh. The dried mortar can be removed mechanically.

Safety Tips:

As with other chemicals, be careful when storing and working with this product to avoid contact with the mouth, eyes and food, and in case of possible contact, immediately flush the area with plenty of water.

Environmental Tips:

Do not spill excess water or soil.

Quality confirmation:

All products produced and supplied by this company are in accordance with international quality standards.

سوالی دارید؟در خدمتیم.