Applications:
– Concrete placement in reinforced structures
– Concrete slabs, foundations, columns, walls, bridges, dam bodies, etc.
– Production of precast elements
– Prestressed concrete
– Industrial hard floors
– Masonry mortars
Benefits:
• Increased concrete workability (higher slump)
• Reduced concrete permeability
• Easier pumping and reduced equipment wear
• Accelerated concrete pouring time
• Prevention of surface cracking
• Enhanced concrete cohesion
• Improved bond between concrete and steel
• Compatible with all cement types
• Chloride- and nitrate-free; harmless to reinforcement bars and concrete.
Dosage:
1–2% of cement weight. The exact dosage is determined based on desired strength, regional climatic conditions, and target workability.
Usage Method:
This product can be added to ready-mix concrete (where water content is adjusted to achieve the desired compressive strength). Mix the concrete for at least 3 minutes before pouring.
A more precise method:
1. Mix aggregates, sand, and cement with 50% of the mixing water for 15–30 seconds.
2. Dissolve RW Plast Admix 100 in a portion of the mixing water (up to 30% of total water) and gradually add it to the mixture.
3. Slowly add the remaining water to achieve the desired workability.
Note: Exceeding the recommended dosage may cause side effects such as excessive delay in initial setting time or air entrainment.
Technical Specifications:
– Physical state: Liquid
– Color: Dark brown
– Specific gravity: 1.02 g/cm³
– pH: Approximately 8
– Storage: Store in original packaging away from extreme temperatures for up to 6 months.
– Packaging: 20 kg pails and 220 kg drums.
Safety Precautions:
– Skin contact: Wash with soap and water.
– Eye or respiratory contact: Rinse with warm water and consult a physician immediately.
Environmental Notes:
Do not dispose of excess product into water or soil.
Quality Certification:
All products manufactured and supplied by this company comply with international quality standards.
