Description
Applications
– Interior/exterior building joints
– Water-exposed joints (e.g., pools, water tanks)
– Wall-to-ceiling joints
– Precast concrete joints
– Specialized environments: Cold storage, power plants, wastewater treatment plants, docks, potable water tanks (no adverse effects on drinking water).
Key Advantages
✔ Exceptional adhesion to diverse materials
✔ Weather/UV-resistant – withstands extreme sunlight
✔ High abrasion resistance
✔ Flexibility across a wide temperature range (-50°C to +80°C)
✔ Chemical solvent resistance (including petroleum)
Coverage
Calculated based on joint volume and sealant density (1.2 g/cm³).
Application Guide
1. Surface Prep:
– Remove oil, dust, moisture, and loose particles.
– For enhanced adhesion, apply a primer to joint surfaces.
2. Mixing (Two-Component Version):
– Blend Parts A + B thoroughly using a low-speed mixer.
– Apply within 40–50 minutes via trowel or injection pump.
3. Single-Component Version:
– Inject directly from cartridges using a sealant gun.
Critical Notes:
⚠ Clean tools before use.
⚠ Use mixed sealant within 30–40 minutes.
⚠ Wear gloves/safety goggles during handling.
Technical Specifications
– Form: Paste
– Colors: Black/Gray/Beige/White
– Density: 1.2 g/cm³
– Service Temp: -50°C to +80°C
– Application Temp: -5°C to +50°C
– Cure Time: 36 hours at 25°C
– Water Absorption: 0.01%
– Elongation: ≥200%
– Elasticity Retention: 60%
– Shelf Life: 6 months (store in original packaging, avoid moisture/extreme temps).
– Packaging: 600g cartridges.
Safety & Environmental Compliance
– Safety: Avoid contact with eyes, mouth, or food. Use gloves. Rinse immediately if exposed.
– Environmental: Do not dispose in water or soil.
Quality Assurance
Manufactured to international quality standards.
