Description
Applications:
– Ease of Formwork Removal: Simplifies and speeds up the formwork removal process.
– Prevents Adhesion: Stops concrete or cement particles from sticking to the formwork surface.
– Smooth Concrete Finish: Produces a clean, flat, dense, and oil-stain-free concrete surface.
– Prevents Peeling: Ensures no peeling of subsequent coatings applied to the concrete.
– Protects Formwork: Reduces wear and tear on formwork.
– Formwork Lubrication: Ideal for concrete elements that do not require painting or adhesive coatings.
Benefits:
– Improved Air Bubble Release: Accelerates the release of air bubbles trapped on the formwork surface.
– High Coverage Capacity: Covers larger formwork surfaces due to its excellent spreading properties.
– No Mechanical Force Required: Eliminates the need for mechanical force during formwork removal.
– No Surface Contamination: Does not alter the color or surface properties of hardened concrete.
– Cost-Effective and Water-Insoluble: Economical and resistant to water dissolution.
Dosage:
The dosage varies depending on the type of formwork and environmental conditions, but typically, 1 liter of RW Form Oil-S is sufficient to prepare approximately 10 to 12 square meters of formwork surface.
Application Method:
1. Surface Preparation: Ensure metal formwork surfaces are clean and free from hardened adhesives, grease, or rust.
2. Application: Apply the form oil using a brush, roller, or sprayer. For new wooden formwork, apply in two stages to prevent excessive absorption.
3. Excess Removal: Remove any excess oil pooling in corners to avoid delayed curing in those areas.
Important Notes:
– Thin Layer Application: Apply a thin layer for maximum efficiency; avoid thick layers.
– Excess Oil Removal: Wipe off excess oil from corners to prevent curing delays.
– Avoid Over-Application: Excessive application in corners may delay curing in those areas.
Technical Specifications:
– Physical State: Liquid
– Color: Light Brown
– Specific Gravity: 0.85 g/cm³
– Flammability: Flammable
– Storage Conditions: Store in original packaging, away from extreme temperatures, at +5°C to +35°C for up to 6 months.
– Packaging: Available in 20-liter cans and 220-liter drums.
Safety Precautions:
– Flammable Material: Keep away from heat and open flames.
– Skin Contact: Wash thoroughly with soap and water.
– Eye or Respiratory Contact: Rinse with warm water and seek immediate medical attention.
Environmental Considerations:
Do not dispose of excess material in water or soil.
Quality Assurance:
All products manufactured and supplied by this company comply with international quality standards.
