Rockwall Cure-W (Concrete Curing Compound (Water-Based))

To achieve high-strength and high-quality concrete, it is essential to provide an appropriate environment for the concrete to reach its maximum potential strength after pouring. During concrete placement in hot weather, specific challenges arise, primarily due to the rapid evaporation of water from the concrete. This rapid evaporation can lead to reduced workability and strength, shrinkage, and the formation of surface cracks. Curing, refers to the set of measures taken to ensure the complete hydration of cement, enabling the concrete to achieve its desired strength. The most common method used worldwide involves covering the concrete surface with a thin layer to prevent water evaporation. When the right product is used, it provides effective curing without adverse effects on the concrete and gradually dissipates over a month due to environmental factors. Rockwall Cure-W is a silicone and resin-based curing compound that complies with ASTM C309-81 standards.
Packaging: Available in 20-liter cans and 220-liter drums.

Introduction
Reviews (0)

Applications:
This product is suitable for large-scale concrete placements such as water channels, industrial floors, and open areas. It is particularly recommended for use in regions with high sun exposure or windy conditions, where rapid water evaporation is a concern, especially in southern and hot climates.

Benefits:
– Ready-to-Use and Easy to Apply: Simplifies the curing process.
– Enhances Surface Hardness and Dust Resistance: Improves surface quality.
– Increases Durability and Strength: Prevents drying and cracking of concrete.
– Cost and Labor Efficiency: More economical compared to traditional curing methods.
– Eliminates the Need for Water Curing: Reduces the dependency on manual watering.
– No Need for Protective Coverings: Eliminates the use of burlap, plastic sheets, etc.
– High Tensile, Flexural, Compressive, and Bonding Strength: Enhances overall concrete performance.

Dosage:
One kilogram of Rockwall Cure-W covers approximately 5 to 6 square meters of concrete surface.

Application Method:
Apply Rockwall Cure-W using a brush or sprayer onto the concrete surface 10 to 30 minutes after finishing the fresh concrete. If the surface is not fully covered, perform touch-ups after 30 minutes.

Important Notes:
– Formwork Removal: If formwork is used, apply the product after removing the forms.
– Vertical Surfaces and Facades: To facilitate easier removal of the curing compound from vertical surfaces, moisten the surface with water before application.

Technical Specifications:
– Physical State: Liquid
– Color: Brown
– Solubility: Water-soluble
– Specific Gravity: 1.1 g/cm³
– pH: Approximately 7
– Packaging: Available in 20-liter cans and 220-liter drums.
– Storage Conditions: Store in original packaging, away from extreme temperatures, for up to 6 months.

Safety Precautions:
When working with solvent-based variants of this product, ensure proper ventilation, avoid high heat and open flames, and wear appropriate protective gear. In case of skin or respiratory contact, rinse immediately with cold water and seek medical attention.

Environmental Considerations:
Do not dispose of excess material in water or soil.

Quality Assurance:
All products manufactured and supplied by this company comply with international quality standards.