Applications:
– Potable water storage tanks and reservoirs
– Wastewater treatment plants and drainage channels
– Bridge decks and marine structures (piers, seawalls)
– Roofing systems and building facades
– Any concrete surface exposed to constant moisture
Key Advantages:
✓ Superior waterproofing performance with extended service life
✓ Excellent sulfate and corrosion resistance
✓ Outstanding adhesion to all common substrates
✓ High elasticity accommodates substrate movement
✓ Exceptional tensile, flexural, and compressive strength
✓ NSF-approved for potable water contact
✓ Non-leaching formula after curing
Coverage Rate:
1.5 kg/m² per 1mm thickness (average)
Application Guidelines:
1. Mixing Procedure:
– Combine 20kg bag with 2.5-4L clean water
– Mix to uniform paste consistency (adjust water as needed)
– Pot life: 25 minutes (ambient temperature dependent)
2. Surface Preparation:
– Remove all loose particles, oils, and weak concrete
– Repair cracks and damaged areas prior to application
– Dampen substrate (no standing water)
3. Application Conditions:
– Ambient temperature: 10-35°C (50-95°F)
– Maintain surface moisture during curing period
Technical Specifications:
– Form: Powder
– Color: Gray
– Density: 1.5 g/cm³
– Mixing Time: 5 minutes
– Working Time: 25 minutes after mixing
– Application Temp Range: 5-35°C (41-95°F)
– Cure Time: 1-4 days (depending on conditions)
– Shelf Life: 6 months in original packaging
– Packaging: 20kg moisture-resistant bags
Cleanup:
– Tools should be cleaned immediately with water
– Cured material requires mechanical removal
Safety & Compliance:
⚠ PPE REQUIREMENTS:
– Chemical-resistant gloves
– Eye protection
– Avoid inhalation of dust
– First Aid: Flush exposed areas with water
– Do not mix with other chemicals
Environmental:
– Do not dispose in waterways or soil
– Contains no volatile organic compounds (VOCs)
Quality Certification:
Manufactured under ISO 9001 quality standards with NSF/ANSI 61 certification for potable water contact.
